Ahead-looking: As instances of burning and melting RTX 5090 energy cables proceed to mount, Asus has demonstrated that its new Again to the Future (BTF) energy connector design can keep protected temperatures whereas delivering greater than triple the GPU’s inventory wattage restrict. The check additionally revealed that BTF can work in tandem with conventional 16-pin connectors – simply in case anybody ever needs to aim a 2,600W overclock.

In a current Bilibili video, translated by Tom’s {Hardware}, Asus China GM Tony Yu pumped practically 2 kilowatts into an Nvidia RTX 5090 to showcase the resilience of the corporate’s various GPU energy connector design. If different producers undertake Asus’s BTF customary, it may scale back fireplace hazards and spark a elementary shift in customized PC design.

The tech emerged after widespread reviews of burning and melting RTX 4090 energy cables that began surfacing a few years in the past. A whole bunch of confirmed incidents have been attributed to a mixture of points: improperly related cables, tight bends close to connectors, the usage of adapters for older ATX 2.0 energy provides, and inherent flaws within the 12VHPWR connector design.

Regardless of newer connector revisions and Nvidia’s promise that the RTX 5090 would keep away from its predecessor’s destiny, at least six confirmed instances of broken connectors have already been reported for the 5090.

BTF addresses these dangers by eliminating the necessity for exterior GPU energy cables. As an alternative, it introduces a brand new connector on the motherboard, streamlining the set up course of and decreasing the variety of elements that would fail.

Suitable GPUs and motherboards embody a further gold finger and a GC-HPWR socket adjoining to the PCIe connector.

Preliminary BTF designs have been rated for 600W, simply above the RTX 5090’s 575W inventory draw. BTF 2.5 raised the ceiling to 1,000W, and Yu’s demonstration practically doubled that determine whereas sustaining protected temperatures.

When delivering 607W to the GPU, the GC-HPWR connector stayed round 35°C. At 1,300W, it solely reached 38°C. Even after hitting simply over 1,900W – sufficient to theoretically energy three RTX 5090s – the temperature topped out at simply 41°C.

In a remaining check, Yu went additional. To match warmth ranges between the GC-HPWR and conventional 16-pin connectors, he related a separate energy provide to every on the identical card. Delivering about 1,200W by way of one and 1,400W by way of the opposite, Yu fed greater than 2,600W into the RTX 5090 – greater than triple Der8auer’s current 800W shunt mod overclock. Underneath these excessive situations, the 16-pin connectors reached round 70°C.

Whereas the outcomes are spectacular, it is nonetheless unclear when BTF-compatible GPUs and motherboards will change into broadly out there. Broad business adoption may make GC-HPWR connectors a extra dependable and safer answer for powering high-end add-on boards.




Source link